Delock industry WLAN USB module 144 Mbps
Description
The Delock USB module offers in a compact construction WLAN function via USB interface and is ideal for installation in industry components like sensors, IPCs, PDAs or notebooks.
Specification
• USB 2.0 interface
• WLAN according IEEE b/g/n (Draft 2.0)
• Chipset: Ralink RT2770 (2720)
• 2,4GHz
• 11b: 1,2,5.5,11Mbps / 11g: 6,9,12,24,36,48,54Mbps
• 11n: legacy, mixed and green field modes, supports 20/40 MHz band width MCS0- 7 (150Mbps PHY rate
• WLAN according IEEE b/g/n (Draft 2.0)
• Chipset: Ralink RT2770 (2720)
• 2,4GHz
• 11b: 1,2,5.5,11Mbps / 11g: 6,9,12,24,36,48,54Mbps
• 11n: legacy, mixed and green field modes, supports 20/40 MHz band width MCS0- 7 (150Mbps PHY rate
support)
• 2 mini coax antenna connection (1T2R )
• Hardware WEP, TKIP, AES engines
• EAP TLS, TTLS, LEAP, PEAP
• WPA1/2 PSK (WPA home)
• WPA1/2 802.1x (WPA enterprise)
• Oposite data fllow, link adaptation, roaming
• Voltage: 5V
• Operating temperature: 0~65°C
• Relative humidity during operation: max.95% (non-condensing)
• Size: 60 x 25 x 3,8mm (LxWxH)
• For Windows CE 5.0 & 6.0/ 98SE/ ME/2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
• 2 mini coax antenna connection (1T2R )
• Hardware WEP, TKIP, AES engines
• EAP TLS, TTLS, LEAP, PEAP
• WPA1/2 PSK (WPA home)
• WPA1/2 802.1x (WPA enterprise)
• Oposite data fllow, link adaptation, roaming
• Voltage: 5V
• Operating temperature: 0~65°C
• Relative humidity during operation: max.95% (non-condensing)
• Size: 60 x 25 x 3,8mm (LxWxH)
• For Windows CE 5.0 & 6.0/ 98SE/ ME/2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
Optional ref. 95835 connecting cable
System requirement
• USB Port
• USB Port
• Windows CE 5.0 & 6.0/ 98SE/ ME/2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
Package content
• USB WLAN module
• USB WLAN module
• Driver CD
Package
• Delock
17.12.2007
Datablad (engelska)
37 kB
13.12.2007
Datablad (tyska)
36.79 kB
25.08.2009
User Manual (English)
507.67 kB
Windows (32 und 64): 2000, XP, Vista, 7
26.37 MB
Treiber
12.11.2009
Windows CE X86 5.0
1.74 MB
Treiber
28.02.2008
Windows CE X86 6.0
3.95 MB
Treiber
28.02.2008
Windows CE ARM 6.0
3.91 MB
Treiber
28.02.2008
Windows CE ARM 5.0
1.81 MB
Treiber
28.02.2008
Linux: ARM
330.46 kB
Treiber
17.03.2009
MAC 10.3,10.4, 10.5, 10.6
5 MB
Treiber
12.11.2009
What is FAA
The Pin 1 FAA is for the RF function Turn-On/Off switching by "Hotkey" (this is mainly designed for notebook PC systems only). Usually it is unnecessary to use the Pin 2 LINK (for LED) and the Pin 1 FAA for the non-Notebook PC system devices. The RF function is activated (pulled High ) even without connecting the Pin 1 to the system motherboard.
Please note: If you connect the Pin 1 FAA to GND, it will make it "pull Low" and hence will disable the RF function! Please note. And the Pin 6 is for the VCC input from the motherboard.
Please note: If you connect the Pin 1 FAA to GND, it will make it "pull Low" and hence will disable the RF function! Please note. And the Pin 6 is for the VCC input from the motherboard.