Delock industry WLAN USB Modul 144 Mbps
Kurzbeschreibung
Das Delock USB Modul bietet in kompakter Bauweise WLAN Funktion über die USB Schnittstelle an und ist ideal für den Einbau in Industriekomponenten, wie Sensoren, IPCs, PDAs oder Notebooks geeignet.
Technische Daten
• USB 2.0 Schnittstelle
• WLAN gem. IEEE 802.11b/g/n (Draft 2.0)
• Chipsatz: Ralink RT2770 (2720)
• 2,4GHz
• 11b: 1,2,5.5,11Mbps / 11g: 6,9,12,24,36,48,54Mbps
• 11n: Legacy, Mixed und Green Field Modes, unterstützt 20/40 MHz Bandbreite MCS0- 7 (150Mbps PHY Rate
• USB 2.0 Schnittstelle
• WLAN gem. IEEE 802.11b/g/n (Draft 2.0)
• Chipsatz: Ralink RT2770 (2720)
• 2,4GHz
• 11b: 1,2,5.5,11Mbps / 11g: 6,9,12,24,36,48,54Mbps
• 11n: Legacy, Mixed und Green Field Modes, unterstützt 20/40 MHz Bandbreite MCS0- 7 (150Mbps PHY Rate
Support)
• 2 mini Coax Antennenanschlüsse (1T2R )
• Hardware WEP, TKIP, AES Engines
• EAP TLS, TTLS, LEAP, PEAP
• WPA1/2 PSK (WPA Home)
• WPA1/2 802.1x (WPA Enterprise)
• Entgegengesetzter Datenfluss, Link Adaptation, Roaming
• Spannung: 5V
• Betriebstemperatur: 0~65°C
• Relative Feuchtigkeit während des Betriebes: max.95% (nicht-kondensierend)
• Maße: 60 x 25 x 3,8mm (LxBxH)
• Für Windows CE 5.0 & 6.0/ 2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
• 2 mini Coax Antennenanschlüsse (1T2R )
• Hardware WEP, TKIP, AES Engines
• EAP TLS, TTLS, LEAP, PEAP
• WPA1/2 PSK (WPA Home)
• WPA1/2 802.1x (WPA Enterprise)
• Entgegengesetzter Datenfluss, Link Adaptation, Roaming
• Spannung: 5V
• Betriebstemperatur: 0~65°C
• Relative Feuchtigkeit während des Betriebes: max.95% (nicht-kondensierend)
• Maße: 60 x 25 x 3,8mm (LxBxH)
• Für Windows CE 5.0 & 6.0/ 2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
Optional Art. 95835 Anschlusskabel
Systemvoraussetzungen
• USB Port
• USB Port
• Windows CE 5.0 & 6.0/2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
Packungsinhalt
• USB WLAN Modul
• Treiber CD
• USB WLAN Modul
• Treiber CD
Verpackung
• Delock
13.12.2007
Datenblatt (Deutsch)
36.79 kB
17.12.2007
Datenblatt (Englisch)
37 kB
25.08.2009
Handbuch (Englisch)
507.67 kB
Windows (32 und 64): 2000, XP, Vista, 7
26.37 MB
Treiber
12.11.2009
Windows CE X86 5.0
1.74 MB
Treiber
28.02.2008
Windows CE X86 6.0
3.95 MB
Treiber
28.02.2008
Windows CE ARM 6.0
3.91 MB
Treiber
28.02.2008
Windows CE ARM 5.0
1.81 MB
Treiber
28.02.2008
Linux: ARM
330.46 kB
Treiber
17.03.2009
MAC 10.3,10.4, 10.5, 10.6
5 MB
Treiber
12.11.2009
Was ist FAA
The Pin 1 FAA is for the RF function Turn-On/Off switching by "Hotkey" (this is mainly designed for notebook PC systems only). Usually it is unnecessary to use the Pin 2 LINK (for LED) and the Pin 1 FAA for the non-Notebook PC system devices. The RF function is activated (pulled High ) even without connecting the Pin 1 to the system motherboard.
Please note: If you connect the Pin 1 FAA to GND, it will make it "pull Low" and hence will disable the RF function! Please note. And the Pin 6 is for the VCC input from the motherboard.
Please note: If you connect the Pin 1 FAA to GND, it will make it "pull Low" and hence will disable the RF function! Please note. And the Pin 6 is for the VCC input from the motherboard.