Delock Comutator soclu electric WLAN MQTT
Descriere scurta
Acest comutator soclu electric de la Delock poate fi controlat prin buton sau WLAN. Cu firmware-ul Tasmota instalat, comutatorul poate fi ușor integrat în sistemele existente pentru automatizarea acasă, IoT sau M2M. Cu ajutorul interfeței web, mufa de alimentare poate fi controlată fără a fi nevoie să se bazeze pe cloud sau o aplicație.
Detalii tehnice
- Conectori:
1 x priză CEE 7/4
1 x soclu CEE 7/3 - Buton de comutare cu indicatorul LED cu 2 culori
- Interfață web
- Control cronometru programabil
- Acceptă MQ Telemetry Transport (MQTT), Domoticz, Home Assistant
- Acceptă Alexa
- Chipset: ESP8285
- Compatibil cu IEEE 802.11n / b / g, 802.3, 802.3u
- Interval frecvenţă: 2,4 GHz
- Putere de transmisie (EIRP): 100 mW
- Potrivit pentru utilizare în interior
- Consum energetic: max. 1,5 W
- Curent nominal: 10 A / 250 V~
- Putere nominală: 2500 W
- Dimensiunui (LxlxÎ): aprox. 60 x 60 x 36 mm
Cerinte de sistem
- Portal WLAN
Pachetul contine
- Comutator soclu electric WLAN
- Manual de utilizare
Pachet
- Retail Box
Technical characteristics
Frequency range
• 2.4 GHz band
Physical characteristics
Lungime
• 60 mm
Width
• 60 mm
Height
• 36 mm
Colour
• alb
25.01.2023
Datenblatt
25.01.2023
Data sheet
25.01.2023
Dane produktu
25.01.2023
Popis produktu
25.01.2023
Feuille de données
25.01.2023
Hoja de datos
25.01.2023
Datablad
25.01.2023
Adatlap
25.01.2023
Kataloški list
25.01.2023
Φύλλο δεδομένων
25.01.2023
Scheda tecnica
25.01.2023
Fișă cu date
17.11.2021
CE - Declaration of conformity
1.52 MB
08.10.2018
GPL
39.41 kB
24.11.2021
User Manual Multilingual
662.52 kB
What is the user name for the web interface if a password has been assigned?
The default user name is "admin".
It is not possible to enter a WLAN password with an asterisk (*).
The problem is solved with the current firmware version 6.5.0 since 22.10.19.
How to flash the device to the latest Tasmota version?
For the socket switch we use a version of Tasmota, that we have adjusted and tested. Please understand that we can only support this Tasmota version.
What are the changes in firmware 6.7.1 since 6.3.20?
• Fix WeMo emulation for 1G echo and 2G echo dot.
• Add command "time" to disable NTP and set UTC time
• Removed support for WPS.
• Add command "time" to disable NTP and set UTC time
• Removed support for WPS.
What are the changes in firmware 7.2?
• Change default GUI to dark theme
• New Arduino Core version
• The LED is now controlled in the same way as Tasmota
• For the hardware configuration a user template is now used.
We recommend you save the device settings and do a "Reset 6" as console command. This will restore the default settings, but keep the WIFI SSID and Password.
• New Arduino Core version
• The LED is now controlled in the same way as Tasmota
• For the hardware configuration a user template is now used.
We recommend you save the device settings and do a "Reset 6" as console command. This will restore the default settings, but keep the WIFI SSID and Password.
Weaker Wi-Fi signal after firmware upgrade
The Wi-Fi calibration needs to be deleted to force the device to re-calibrate Wi-Fi after it restarts.
1. Run "reset 3" in the Console (your existing settings will not be affected).
2. The device will restart
3. Cycle the power on the device (unplug and plug it).
Wi-Fi calibration will not be done unless the device performs a cold boot from power up.
1. Run "reset 3" in the Console (your existing settings will not be affected).
2. The device will restart
3. Cycle the power on the device (unplug and plug it).
Wi-Fi calibration will not be done unless the device performs a cold boot from power up.
Configuration options
In case of problems, the following switches can help:
SetOption55 mDNS service 0 = disable 1 = enable
SetOption19 Set Home Assistant discovery protocol 0 = use Tasmota integration (default) 1 = use MQTT discovery
SetOption109 0 = (default) 1 = force gen1 Alexa mode, for Echo Dot 2nd gen devices only
SetOption55 mDNS service 0 = disable 1 = enable
SetOption19 Set Home Assistant discovery protocol 0 = use Tasmota integration (default) 1 = use MQTT discovery
SetOption109 0 = (default) 1 = force gen1 Alexa mode, for Echo Dot 2nd gen devices only
The device does not connect to the Wi-Fi
If your device does not connect to your Wi-Fi and you've made sure the Wi-Fi credentials are correct, it is caused by using special chars or white spaces in your SSID or Password of your Wi-Fi. Remove them and try again. Other reason can be using an SSID longer than the allowed 32 characters.
articole similare
Toate denumirile și simbolurile menționate aici sunt proprietatea producătorului respectiv. Erorile de imprimare, modificările și erorile sunt o excepție.
Delock Comutator priză de alimentare WLAN MQTT cu monitorizarea energiei
Nr. 11827
Delock WLAN EASY-USB comutator inteligent MQTT
Nr. 11828