Delock Πρίζα Εναλλαγέα Ρεύματος WLAN MQTT
Περιγραφή
Αυτή η πρίζα εναλλαγέα ρεύματος της Delock μπορεί να ελεγχθεί μέσω κουμπιού ή μέσω WLAN. Με το εγκατεστημένο Tasmotafirmware, ο εναλλαγέας μπορεί να τοποθετηθεί σε υπάρχοντα συστήματα για οικιακή αυτοματοποίηση, IoT ή M2M. Με τη βοήθεια της διεπαφής διαδικτύου, η πρίζα ρεύματος μπορεί να ελεγχθεί χωρίς την βοήθεια του cloud ή μιας εφαρμογής.
Προδιαγραφές
- Συνδετήρας:
1 x υποδοχή CEE 7/4
1 x πρίζα CEE 7/3 - Πλήκτρο εναλλαγής με 2-χρωμη ένδειξη LED
- Διεπαφή διαδικτόυ
- Προγραμματιζόμενος έλεγχος χρονόμετρου
- Υποστηρίζει MQ Telemetry Transport (MQTT), Domoticz, Home Assistant
- Υποστηρίζει Alexa
- Chipset: ESP8285
- Συμβατή με IEEE 802.11b/g/n
- Εύρος συχνότητας: 2,4 GHz
- Ισχύς μετάδοσης (EIRP): 100 mW
- Κατάλληλο για εσωτερική χρήση
- Κατανάλωση ρεύματος: μέγ. 1,5 W
- Προβλεπόμενο ρεύμα: 10 A / 250 V~
- Προβλεπόμενη παροχή ρεύματος: 2500 W
- Διαστάσεις (ΜxΠxΥ): περ. 60 x 60 x 36 mm
Απαιτήσεις συστήματος
- WLAN Gateway
Περιεχόμενα συσκευασίας
- Πρίζα εναλλαγέα ρεύματος WLAN
- Εγχειρίδιο χρήστη
Συσκευασία
- Retail Box
Technical characteristics
Frequency range
• 2.4 GHz band
Physical characteristics
Μήκος
• 60 mm
Width
• 60 mm
Height
• 36 mm
Χρώμα
• λευκό
25.01.2023
Datenblatt
25.01.2023
Data sheet
25.01.2023
Dane produktu
25.01.2023
Popis produktu
25.01.2023
Feuille de données
25.01.2023
Hoja de datos
25.01.2023
Datablad
25.01.2023
Adatlap
25.01.2023
Kataloški list
25.01.2023
Φύλλο δεδομένων
25.01.2023
Scheda tecnica
25.01.2023
Fișă cu date
17.11.2021
CE - Declaration of conformity
1.52 MB
08.10.2018
GPL
39.41 kB
24.11.2021
User Manual Multilingual
662.52 kB
What is the user name for the web interface if a password has been assigned?
The default user name is "admin".
It is not possible to enter a WLAN password with an asterisk (*).
The problem is solved with the current firmware version 6.5.0 since 22.10.19.
How to flash the device to the latest Tasmota version?
For the socket switch we use a version of Tasmota, that we have adjusted and tested. Please understand that we can only support this Tasmota version.
What are the changes in firmware 6.7.1 since 6.3.20?
• Fix WeMo emulation for 1G echo and 2G echo dot.
• Add command "time" to disable NTP and set UTC time
• Removed support for WPS.
• Add command "time" to disable NTP and set UTC time
• Removed support for WPS.
What are the changes in firmware 7.2?
• Change default GUI to dark theme
• New Arduino Core version
• The LED is now controlled in the same way as Tasmota
• For the hardware configuration a user template is now used.
We recommend you save the device settings and do a "Reset 6" as console command. This will restore the default settings, but keep the WIFI SSID and Password.
• New Arduino Core version
• The LED is now controlled in the same way as Tasmota
• For the hardware configuration a user template is now used.
We recommend you save the device settings and do a "Reset 6" as console command. This will restore the default settings, but keep the WIFI SSID and Password.
Weaker Wi-Fi signal after firmware upgrade
The Wi-Fi calibration needs to be deleted to force the device to re-calibrate Wi-Fi after it restarts.
1. Run "reset 3" in the Console (your existing settings will not be affected).
2. The device will restart
3. Cycle the power on the device (unplug and plug it).
Wi-Fi calibration will not be done unless the device performs a cold boot from power up.
1. Run "reset 3" in the Console (your existing settings will not be affected).
2. The device will restart
3. Cycle the power on the device (unplug and plug it).
Wi-Fi calibration will not be done unless the device performs a cold boot from power up.
Configuration options
In case of problems, the following switches can help:
SetOption55 mDNS service 0 = disable 1 = enable
SetOption19 Set Home Assistant discovery protocol 0 = use Tasmota integration (default) 1 = use MQTT discovery
SetOption109 0 = (default) 1 = force gen1 Alexa mode, for Echo Dot 2nd gen devices only
SetOption55 mDNS service 0 = disable 1 = enable
SetOption19 Set Home Assistant discovery protocol 0 = use Tasmota integration (default) 1 = use MQTT discovery
SetOption109 0 = (default) 1 = force gen1 Alexa mode, for Echo Dot 2nd gen devices only
The device does not connect to the Wi-Fi
If your device does not connect to your Wi-Fi and you've made sure the Wi-Fi credentials are correct, it is caused by using special chars or white spaces in your SSID or Password of your Wi-Fi. Remove them and try again. Other reason can be using an SSID longer than the allowed 32 characters.
παρόμοια αντικείμενα
Όλες οι επωνυμίες και τα σύμβολα που αναφέρονται στο παρόν ανήκουν στον αντίστοιχο δημιουργό. Εξαιρούνται σφάλματα εκτύπωσης, αλλαγές και άλλου τύπου σφάλματα.
Delock Εναλλαγέας Πρίζας Ρεύματος WLAN MQTT με έλεγχο ενέργειας
Αρ. προϊόντος 11827
Delock WLAN EASY-USB Διακόπτης Smart MQTT
Αρ. προϊόντος 11828