Delock DIP sliding switch 7-digit 2.54 mm pitch THT vertical red 2 pieces
Description
This DIP sliding switch by Delock is suitable for the through-hole mounting on a PCB.
THT Assembly Technology
The attached soldering pins on the DIP switch can be inserted through contact holes on a PCB and soldered from the bottom side. The switching rows are used to set configurations and to change parameters.
Multifunctional application
The DIP switch is mainly used in telecommunications, computers and measuring.
Technical details
- Connectors:
2 x 7 soldering pin - Number of positions: 7
- Pitch: 2.54 mm
- Switch position: on / off
- Switching rating: 25 mA, 24 VDC
- Insulation resistance: 100 MΩ / 500 VDC
- Withstanding voltage: 300 VAC / 1 minute
- Soldering temperature: 250 °C for ca. 3 - 5 seconds
- Mechanical life: 2000 cycles
- Environmental temperature: -40 °C ~ 85 °C
- Operating temperature: -40 °C ~ 85 °C
- Material: plastic
- Colour: red
- Dimensions (LxWxH): ca. 19.2 x 9.9 x 5.5 mm
Package content
- 2 x DIP sliding switch
Package
- Tube
General
Mounting type
• Soldering
Interface
connector
• 2 x 7 soldering pin
Technical characteristics
Storage temperature
• -40 °C ~ 85 °C
Operating temperature
• -40 °C ~ 85 °C
Resistor
• 100 MΩ / 500 VDC
Physical characteristics
Pitch distance
• 2.54 mm
Material
• Plastic
Length
• 19.2 mm
Width
• 9.9 mm
Height
• 5.5 mm
Switch
• On / Off
Colour
• red
05.02.2020
Datenblatt
05.02.2020
Data sheet
05.02.2020
Dane produktu
05.02.2020
Popis produktu
05.02.2020
Feuille de données
05.02.2020
Hoja de datos
05.02.2020
Datablad
05.02.2020
Adatlap
05.02.2020
Kataloški list
05.02.2020
Φύλλο δεδομένων
05.02.2020
Scheda tecnica
05.02.2020
Fișă cu date
29.01.2020
Technical drawing
162.86 kB