Delock DIP sliding switch 4-digit 2.54 mm pitch THT vertical red 10 pieces
Description
This DIP sliding switch by Delock is suitable for the through-hole mounting on a PCB.
THT Assembly Technology
The attached soldering pins on the DIP switch can be inserted through contact holes on a PCB and soldered from the bottom side. The switching rows are used to set configurations and to change parameters.
Multifunctional application
The DIP switch is mainly used in telecommunications, computers and measuring.
Technical details
- Connectors:
2 x 4 soldering pin - Number of positions: 4
- Pitch: 2.54 mm
- Switch position: on / off
- Switching rating: 25 mA, 24 VDC
- Insulation resistance: 100 MΩ / 500 VDC
- Withstanding voltage: 300 VAC / 1 minute
- Soldering temperature: 250 °C for ca. 3 - 5 seconds
- Environmental temperature: -40 °C ~ 85 °C
- Operating temperature: -20 °C ~ 85 °C
- Material: plastic
- Colour: red
- Dimensions (LxWxH): ca. 11.6 x 9.9 x 5.6 mm
Package content
- 10 x DIP sliding switch
Package
- Tube
General
Mounting type
• Soldering
Interface
connector
• 2 x 4 soldering pin
Technical characteristics
Storage temperature
• -40 °C ~ 85 °C
Operating temperature
• -20 °C ~ 85 °C
Resistor
• 100 MΩ / 500 VDC
Physical characteristics
Pitch distance
• 2.54 mm
Material
• Plastic
Length
• 11.6 mm
Width
• 9.9 mm
Height
• 5.6 mm
Switch
• On / Off
Colour
• red
16.10.2019
Datenblatt
16.10.2019
Data sheet
16.10.2019
Dane produktu
16.10.2019
Popis produktu
16.10.2019
Feuille de données
16.10.2019
Hoja de datos
16.10.2019
Datablad
16.10.2019
Adatlap
16.10.2019
Kataloški list
16.10.2019
Φύλλο δεδομένων
16.10.2019
Scheda tecnica
16.10.2019
Fișă cu date
04.10.2019
Technical drawing
176.25 kB